The Genie S-65 telescopic boom offers greater horizontal outreach that any other type of aerial platform – perfect when you’re working in an area with limited access.
The Genie S-65 features a ramped boom control system providing smooth boom functions and finer control. A virtual pivot primary boom aligns the machine’s centre of gravity for a lower machine weight.
| Genie S65 | |
|---|---|
| Max Working Height | 21.8m |
| Max Platform Height | 19.8m |
| Outreach | 17.1m |
| Overall Width | 2.49m |
| Stowed Length | 9.5m |
| Stowed Height | 2.72m |
| Platform Capacity | 227kg |
| Gross Machine Weight | 10024kg |
| Stowed Gradeability | 30% |
Specifications may be subject to change – clarification should be sought at point of hire
| Product Features | |
|---|---|
| › Self-levelling platform | › Fully proportional joystick controls |
| › Drive enable | › Tilt alarm |
| › Flashing beacon | › Hour-meter |
| › Locking turntable covers | › Two speed wheel motors |
| › Hydraulic platform rotation | › Thumb rocker steering |
| › AC power cord to platform | › Descent and travel alarms |
| › Horn | › 360⁰ continuous turntable rotation |
| › Positive traction drive | › Certified load sensor |
This 4×4 hybrid articulated boom lift offers an array of features that set it apart from the competition as a versatile, all-terrain machine.
Manoeuvring admirably in tight spaces thanks to the machine’s compact chassis and low weight, the Niftylift HR17 reaches a 17m working height and provides one of the most impressive working envelopes in its class.
The Manitou 170 AETJ-L has a maximum working height of 16.9 metres. This is a highly compact and manoeuvrable articulating boom platform with an exceptional 9.4m outreach. Designed with operator comfort in mind, features include a spacious mesh floor basket for increased visibility and a rigidly designed boom.
The Genie Z45/25(J) has been designed for work running up-close and parallel to walls. This machine uses a combination of 355⁰ non-continuous turntable rotation and 135⁰ platform rotation to provide enhanced cage positioning, minimising the need to reposition the machine. This is assisted by the dual parallel a z shaped boom system. The facility for running the machine parallel to a wall makes it a perfect choice for painting restoration work, cladding installations, and glazing. An impressive up-and-over reach of 7.16m, a 16.07m working height, and a 7.65m outreach provide scope for large, high-reach projects.
The Dingli AMWP8100 is a vertical platform with a capacity of 200kg and a working height of up to 11.2m.
It’s ideal for maintenance projects inside due to it’s tight turning radius and non marking tyre, but also great for outdoor use as it features automatic pothole protection.
It’s compact dimensions allow it to pass easily through doors and narrow spaces, it also offers a 3m horizontal outreach and the turret can rotate around 345⁰.